TAPE_GET_DRIVE_PARAMETERS

The TAPE_GET_DRIVE_PARAMETERS structure describes the tape drive.

typedef struct _TAPE_GET_DRIVE_PARAMETERS { // tgdp

BOOLEAN ECC;

BOOLEAN Compression;

BOOLEAN DataPadding;

BOOLEAN ReportSetmarks;

ULONG DefaultBlockSize;

ULONG MaximumBlockSize;

ULONG MinimumBlockSize;

ULONG MaximumPartitionCount;

ULONG FeaturesLow;

ULONG FeaturesHigh;

ULONG EOTWarningZoneSize;

} TAPE_GET_DRIVE_PARAMETERS;

Members

ECC

Specifies whether the device supports hardware error correction. This member is TRUE if hardware error correction is supported.

Compression

Specifies whether hardware data compression is enabled or disabled. This member is TRUE if hardware data compression is enabled.

DataPadding

Specifies whether data padding is enabled or disabled. Data padding keeps the tape streaming at a constant speed. This member is TRUE if data padding is enabled.

ReportSetmarks

Specifies whether setmark reporting is enabled or disabled. This member is TRUE if setmark reporting is enabled.

DefaultBlockSize

Specifies the device's default fixed block size.

MaximumBlockSize

Specifies the device's maximum block size.

MinimumBlockSize

Specifies the device's minimum block size.

MaximumPartitionCount

Specifies the maximum number of partitions that can be created on the device.

FeaturesLow

Specifies the low-order 32 bits of the device features flag. This member can be one or more of following values:

Value	Meaning
TAPE_DRIVE_COMPRESSION	The device supports hardware data compression.
TAPE_DRIVE_ECC	The device supports hardware error correction.
TAPE_DRIVE_ERASE_BOP_ONLY	The device performs the erase operation from the beginning-of-partition marker only.
TAPE_DRIVE_ERASE_LONG	The device performs a long erase operation.
TAPE_DRIVE_ERASE_IMMEDIATE	The device performs an immediate erase operation that is, it returns when the erase operation begins.
TAPE_DRIVE_ERASE_SHORT	The device performs a short erase operation.
TAPE_DRIVE_FIXED	The device creates fixed data partitions.
TAPE_DRIVE_FIXED_BLOCK	The device supports fixed-length block mode.
TAPE_DRIVE_INITIATOR	The device creates initiator-defined partitions.
TAPE_DRIVE_PADDING	The device supports data padding.
TAPE_DRIVE_GET_ABSOLUTE_BLK	The device provides the current device-specific block address.
TAPE_DRIVE_GET_LOGICAL_BLK	The device provides the current logical block address (and logical tape partition).
TAPE_DRIVE_REPORT_SMKS	The device supports setmark reporting.
TAPE_DRIVE_SELECT	The device creates select data partitions.
TAPE_DRIVE_SET_EOT_WZ_SIZE	The device supports setting the end-of-medium warning size.
TAPE_DRIVE_TAPE_CAPACITY	The device returns the maximum capacity of the tape.
TAPE_DRIVE_TAPE_REMAINING	The device returns the remaining capacity of the tape.
TAPE_DRIVE_VARIABLE_BLOCK	The device supports variable-length block mode.
TAPE_DRIVE_WRITE_PROTECT	The device returns an error if the tape is write-enabled or write-protected.

FeaturesHigh

Contains the high-order 32 bits of the device features flag. This member can be one or more of the following values:

Value	Meaning
TAPE_DRIVE_ABS_BLK_IMMED	The device moves the tape to a device-specific block address and returns as soon as the move begins.
TAPE_DRIVE_ABSOLUTE_BLK	The device moves the tape to a device specific block address.
TAPE_DRIVE_END_OF_DATA	The device moves the tape to the end-of-data marker in a partition.
TAPE_DRIVE_FILEMARKS	The device moves the tape forward (or backward) a specified number of filemarks.
TAPE_DRIVE_LOAD_UNLOAD	The device enables and disables the device for further operations.
TAPE_DRIVE_LOAD_UNLD_IMMED	The device supports immediate load and unload operations.
TAPE_DRIVE_LOCK_UNLOCK	The device enables and disables the tape ejection mechanism.
TAPE_DRIVE_LOCK_UNLK_IMMED	The device supports immediate lock and unlock operations.
TAPE_DRIVE_LOG_BLK_IMMED	The device moves the tape to a logical block address in a partition and returns as soon as the move begins.
TAPE_DRIVE_LOGICAL_BLK	The device moves the tape to a logical block address in a partition.
TAPE_DRIVE_RELATIVE_BLKS	The device moves the tape forward (or backward) a specified number of blocks.
TAPE_DRIVE_REVERSE_POSITION	The device moves the tape backward over blocks, filemarks, or setmarks.
TAPE_DRIVE_REWIND_IMMEDIATE	The device supports immediate rewind operation.
TAPE_DRIVE_SEQUENTIAL_FMKS	The device moves the tape forward (or backward) to the first occurrence of a specified number of consecutive filemarks.
TAPE_DRIVE_SEQUENTIAL_SMKS	The device moves the tape forward (or backward) to the first occurrence of a specified number of consecutive setmarks.
TAPE_DRIVE_SET_BLOCK_SIZE	The device supports setting the size of a fixed-length logical block or setting the variable-length block mode.
TAPE_DRIVE_SET_COMPRESSION	The device enables and disables hardware data compression.
TAPE_DRIVE_SET_ECC	The device enables and disables hardware error correction.
TAPE_DRIVE_SET_PADDING	The device enables and disables data padding.
TAPE_DRIVE_SET_REPORT_SMKS	The device enables and disables the reporting of setmarks.
TAPE_DRIVE_SETMARKS	The device moves the tape forward (or reverse) a specified number of setmarks.
TAPE_DRIVE_SPACE_IMMEDIATE	The device supports immediate spacing.
TAPE_DRIVE_TENSION	The device supports tape tensioning.
TAPE_DRIVE_TENSION_IMMED	The device supports immediate tape tensioning.
TAPE_DRIVE_WRITE_FILEMARKS	The device writes filemarks.
TAPE_DRIVE_WRITE_LONG_FMKS	The device writes long filemarks.
TAPE_DRIVE_WRITE_MARK_IMMED	The device supports immediate writing of short and long filemarks.
TAPE_DRIVE_WRITE_SETMARKS	The device writes setmarks.
TAPE_DRIVE_WRITE_SHORT_FMKS	The device writes short filemarks.

EOTWarningZoneSize

Indicates the number of bytes between the end-of-tape warning and the physical end of the tape.

Software for developers

Delphi Components
.Net Components
Software for Android Developers

More information resources

MegaDetailed.Net
Unix Manual Pages
Delphi Examples

Databases for Amazon shops developers

Amazon Categories Database
Browse Nodes Database